EVS-150 Emergency Chlorine Scrubber
The EVS-150 emergency chlorine scrubber is a multi-stage wet scrubber system designed to treat chlorine vapors from a bank of 150lb (70kg) chlorine cylinders, at leak rates of 28 lbs/min or more, exceeding the requirement of the Uniform Fire Code. The EVS-150 system is designed to maintain negative pressure in the chlorination and chlorine storage rooms, while limiting the atmospheric release of chlorine to less than 1 ppm.
|
GUARANTEED PERFORMANCE
The EVS-150 scrubber is capable of reducing the inlet chlorine gas concentration to less than 1 ppm at the outlet. A pre-treatment stage handles extremely high concentrations while subsequent high-efficiency stages remove the remainder of the toxic vapors. During catastrophic releases, the EVS-150 achieves more than 99.999% chlorine vapor removal efficiency. |
MAJOR SYSTEM COMPONENTS
• FRP Scrubber Vessel • Integral FRP Caustic Storage Tank • FRP Exhaust Fan • Caustic Recirculation Pump • FRP Control Panel • FRP Exhaust Stack |
SYSTEM FEATURES
• Factory-assembled, packaged system • Minimum Installation Cost and Time • Superior Design and High Performance • Low Cost of Operation & Easy Maintenance • Automatic and Manual Operation • Optional Features for Maximum Safety |
SYSTEM BENEFITS
• System is assembled, piped, wired and tested at factory
• Enables better quality control at the factory
• Easier transportation, handling and installation
• Installation time of less than 8 hours
• Installation requires only provision of concrete pad, inlet ductwork, utility connections and fill of caustic soda
• Excess liquid to absorb heat of absorption for maximum chlorine release
• Low pressure recirculation of scrubber liquid enhances safety
• Three-stage chemical process ensures efficiency greater than 99.999%
• Random packing provides large surface area for gas-liquid contact
• Low profile with top and side access for easy maintenance
• Vertical seal-less pump
• Low horsepower for pump and fan motors
• System can run in manual mode for maintenance purposes and in fully automatic mode for standby emergency operation
• Standby recirculation pump
• Standby induced exhaust fan
• Sump insulation / sump heater
Please contact us here for more information on our Chlorine Scrubber Systems, product specifications, or a customized project quote or chat with us now by clicking on the chat icon in the bottom right.
• System is assembled, piped, wired and tested at factory
• Enables better quality control at the factory
• Easier transportation, handling and installation
• Installation time of less than 8 hours
• Installation requires only provision of concrete pad, inlet ductwork, utility connections and fill of caustic soda
• Excess liquid to absorb heat of absorption for maximum chlorine release
• Low pressure recirculation of scrubber liquid enhances safety
• Three-stage chemical process ensures efficiency greater than 99.999%
• Random packing provides large surface area for gas-liquid contact
• Low profile with top and side access for easy maintenance
• Vertical seal-less pump
• Low horsepower for pump and fan motors
• System can run in manual mode for maintenance purposes and in fully automatic mode for standby emergency operation
• Standby recirculation pump
• Standby induced exhaust fan
• Sump insulation / sump heater
Please contact us here for more information on our Chlorine Scrubber Systems, product specifications, or a customized project quote or chat with us now by clicking on the chat icon in the bottom right.
Available Capacities
| Model No. | Design Capacity | Documentation |
|---|---|---|
| EVS-150 | Up to 900 lbs/400 kg of Chlorine | View Brochure |
| EVS-2000 | Up to 3-ton of Chlorine | View Brochure |
| EVS-2000C | Up to 1-ton of Chlorine | View Brochure |
