EVS-2000 Emergency Chlorine Scrubber
The EVS-2000 emergency chlorine scrubber is a multi-stage wet scrubber system designed to treat up to 3-Ton of chlorine vapor, at leak rates of 100 lbs/min or more, exceeding the requirement of the Uniform Fire Code. The EVS-2000 system is designed to maintain negative pressure in the chlorination and chlorine storage rooms, while limiting the atmospheric release of chlorine to less than 1 ppm.
|
GUARANTEED PERFORMANCE
The EVS-2000 scrubber is capable of reducing the inlet chlorine gas concentration to less than 1 ppm at the outlet. A pre-treatment stage handles extremely high concentrations while subsequent high efficiency stages remove the remainder of the toxic vapors. During catastrophic releases, the EVS-2000 achieves more than 99.999% chlorine vapor removal efficiency. |
MAJOR SYSTEM COMPONENTS
• FRP Scrubber Vessel • Integral FRP Caustic Storage Tank • FRP Exhaust Fan • Caustic Recirculation Pump • FRP Control Panel • FRP Exhaust Stack |
SYSTEM FEATURES
• Factory-assembled, packaged system • Minimum Installation Cost and Time • Superior Design and High Performance • Low Cost of Operation & Easy Maintenance • Automatic and Manual Operation • Optional Features for Maximum Safety |
SYSTEM BENEFITS
• System is assembled, piped, wired and tested at factory
• Enables better quality control at the factory
• Easier transportation, handling and installation
• Installation time of less than 8 hours
• Installation requires only provision of concrete pad, inlet ductwork, utility connections and fill of caustic soda
• Excess liquid to absorb heat of absorption for maximum chlorine release
• Low pressure recirculation of scrubber liquid enhances safety
• Three-stage chemical process ensures efficiency greater than 99.999%
• Random packing provides large surface area for gas-liquid contact
• Low profile with top and side access for easy maintenance
• Vertical seal-less pump
• Low horsepower for pump and fan motors
• System can run in manual mode for maintenance purposes and in fully automatic mode for standby emergency operation
• Standby recirculation pump
• Standby induced exhaust fan
• Sump insulation / sump heater
• Equipment enclosure (pump, fan, controls)
Please contact us here for more information on our Chlorine Scrubber Systems, product specifications, or a customized project quote or chat with us now by clicking on the chat icon in the bottom right.
• System is assembled, piped, wired and tested at factory
• Enables better quality control at the factory
• Easier transportation, handling and installation
• Installation time of less than 8 hours
• Installation requires only provision of concrete pad, inlet ductwork, utility connections and fill of caustic soda
• Excess liquid to absorb heat of absorption for maximum chlorine release
• Low pressure recirculation of scrubber liquid enhances safety
• Three-stage chemical process ensures efficiency greater than 99.999%
• Random packing provides large surface area for gas-liquid contact
• Low profile with top and side access for easy maintenance
• Vertical seal-less pump
• Low horsepower for pump and fan motors
• System can run in manual mode for maintenance purposes and in fully automatic mode for standby emergency operation
• Standby recirculation pump
• Standby induced exhaust fan
• Sump insulation / sump heater
• Equipment enclosure (pump, fan, controls)
Please contact us here for more information on our Chlorine Scrubber Systems, product specifications, or a customized project quote or chat with us now by clicking on the chat icon in the bottom right.
Your browser does not support viewing this document. Click here to download the document.
