IMS Product & Service Overview
Our fluoride and ammonia feed systems, lime slakers, storage silos, packaged odor control systems, and emergency chlorine scrubbers are fully assembled at our manufacturing factory and designed for ease of installation thereby reducing both time and expense at the client site.
Bulk Chemical Storage and Feed Systems (Storage Silos)
Integrity Municipal Systems LLC (IMS) Bulk Chemical Storage and Feed Systems are used to store and feed dry Hydrated Lime, Quicklime, Powdered Activated Carbon (PAC), or Soda Ash in a silo, dissolve it in a tank, and pump the chemical solution to the point of application. Each system’s design is tailored to the project’s needs. Systems typically include a storage silo with accessories and an integral chemical feed equipment room with instrumentation and controls to make a complete and functional system.
Benefits
• Pre-Assembled, Piped, Wired and Factory Tested
• Fully Engineered and Integrated Systems
• Single-Piece Welded Silo Construction (up to 14’-0” in diameter)
• Skirted Interior with Insulation, Lighting, Fans, Dampers, Louvers, and Heaters
• Completely Automatic Control System with PLC
• Flexible Configurations and Options for Differing Installation Requirements
Lime Paste-Type Slaker Systems (A-758™ & A-758 Plus™)
The IMS Lime Slaker Systems provide continuous high volume lime slurries (up to 8,000 lbs/hour) for industrial and municipal process pH adjustment, flocculation, and chemical reaction. The superior paste-type slaking technology consistently produces a higher strength and more reactive lime slurry resulting in more efficient and more economical use of the quicklime.
Lime Slaker System: Grit Removers
• Conveyor Type Grit Remover
• Screw Type Grit Remover
• Screen Type Grit Remover
Lime Slaker System: Feeders
• Series 31-165 Gravimetric Feeder
• Series 32-215 Volumetric Feeder
• Series 32-300 Volumetric Feeder
SGC-2000™ and SGC-2000 PLUS™ Gravimetric Feed Controllers
• Accurate and reliable gravimetric feeder control
• Allen-Bradley based industrial control hardware and software
• Limited number of interconnecting wires for easy installation and generation, and maintenance
• Simple and intuitive touchscreen interface
• Ethernet communications
• Optional Feeder AC motor use for reduced transformer size, heat
• Optional VFD ODVA communication eliminates analog signal inaccuracies
Odor Control Systems
IMS has developed a line of standardized, pre-engineered, factory assembled odor control systems for treating odors at sewage pump stations and wastewater treatment plants. Pre-engineered systems are simple to install, reducing the overall installed cost and delivery time.
Biological Odor Control Systems
The I-BOx® Biological Odor Control System (patent pending) uses a two-stage process with a biological stage to remove 99% of the hydrogen
sulfide (H2S), followed by an activated carbon polishing stage to remove residual H2S and organic odors. Standard models are available to treat up to 5,000 cfm (8500 m3/h) of odorous air.
I-BOx® Biological Odor Control System Models:
• I-BOx® 75 - 250 cfm BIOLOGICAL ODOR CONTROL SYSTEM
• I-BOx® 350 - 5,000 cfm BIOLOGICAL ODOR CONTROL SYSTEM
Carbon Adsorber Odor Control Systems
The IMS carbon adsorber odor control systems are designed to work with a wide selection of media: virgin activated carbon media for low odor level, and high capacity carbon for higher H2S concentrations.
• Modular Carbon Systems (MCS) Activated Carbon Odor Control Systems:
The MCS carbon adsorber odor control systems are single bed, skid-mounted, dry media systems, designed for relatively lower odor levels. The media may be virgin activated carbon or any of a number of specialty catalytic carbon media. Standard models are available to treat up to 1,250 cfm (2,120 (m3/h)) of odorous air.
• Bulk Carbon Systems (BCS) Activated Carbon Odor Control Systems:
The BCS activated carbon odor control systems are larger bulk media systems, designed for higher air flow rates. The media may be virgin activated carbon or any of a number of specialty catalytic carbon media. Standard models are available to treat up to 6,800 cfm (11600 m3/h) in a single carbon bed system and up to 20,000 cfm (34000 m3/h) in a dual bed system.
Chemical Scrubber Odor Control Systems
IMS’ Packaged Chemical Scrubber is a multi-stage high efficiency scrubber capable of promoting different chemical reactions in each stage and targeting a range of different compounds found in municipal Wastewater Treatment Plants and Pump Stations. The system is designed tobe compact and low profile, enabling indoor or outdoor installation. IMS’ chemical scrubber system is completely factory assembled for ease of installation treating airflow capacities up to 40,000 m3/h in a single system.
• Reliable in the long term with robust design
• Minimized footprint and height required for the scrubber system and associated pumps and piping ductwork.
• Provides flexibility to customize the chemistry of each stage, to optimize the operating chemistry for actual plant odors, and to respond to process variations.
• Will make optimum use of chemical and minimize chemical costs.
• Will be delivered and installed quickly and smoothly, with minimum construction and installation cost and time.
• Will not require downtime for routine calibration and maintenance.
• Provides maximum value measured by effective odor control with minimum problems, maintenance and operating cost.
Packaged Chemical Feed Systems
IMS chemical feed systems are pre-assembled, fully-functional chemical delivery systems for water treatment applications. These compact, user-friendly chemical skids include local storage tanks, full secondary containment, dosing pumps, instrumentation and controls. Systems are piped and wired at the factory for easy and quick hook-up.
Aqueous Ammonia Feed System
IMS packaged Aqueous Ammonia feed systems are used in the formation of chloramines for disinfection within the treated water pipelines and distribution system. They include a heavy duty pressure rated aqueous ammonia storage tank, integral ammonia fume scrubber, peristaltic dosing pump, instrumentation and controls in a fully contained, pre-assembled skid.
Fluoride Saturator and Feed System
IMS packaged Fluoride Feed Systems are used for community water fluoridation. They are designed with separate saturator and solution tanks to assure complete saturation, high reliability, low maintenance, and ease of use. Systems are sized to meet customer requirements.
Hydrofluosilicic Acid Feed System
IMS packaged Hydrofluosilicic Acid Feed Systems are used for community water fluoridation. They provide safe storage and accurate dosing of Hydrofluosilicic Acid, in a fully contained, pre-assembled skid. Packaged systems are pre-wired and piped with local instrumentation and controls.
Liquid Ammonium Sulfate (LAS) Saturator and Feed System
IMS packaged liquid ammonium sulfate (LAS) feed systems are used in the formation of chloramines for disinfection within the treated water pipelines and distribution system. IMS LAS Saturator and Feed System technology can reliably produce liquid ammonium sulfate solution from solid ammonium sulfate, decreasing chloramination chemical costs. The system is fully contained in a pre-assembled skid.
Sodium Hypochlorite Feed System
IMS packaged Sodium Hypochlorite Feed Systems are used as an alternative to gaseous chlorine to provide disinfection of the water at the water treatment plant and distribution system. They provide safe storage and controlled, accurate delivery of sodium hypochlorite solution, in a fully contained, pre-assembled skid. Systems may be customized to meet user needs.
Emergency Chlorine Scrubbers
IMS wet emergency chlorine scrubber systems are designed to contain and treat accidental releases of chlorine gas. The scrubber systems are factory pre-assembled, piped, wired and tested.
EVS-150
The EVS-150 emergency chlorine scrubber is a multi-stage wet scrubber system designed to treat chlorine vapors from a bank of 150lb (70kg) chlorine cylinders, at leak rates of 28 lbs/min or more, exceeding the requirement of the Uniform Fire Code. The EVS-150 system is designed to maintain negative pressure in the chlorination and chlorine storage rooms, while limiting the atmospheric release of chlorine to less than 1 ppm. The factory-assembled EVS-150 system is very compact, with low profile suitable for either indoor or outdoor installation.
EVS-2000
The EVS-2000 emergency chlorine scrubber is a multistage wet scrubber system designed to treat up to three tons of chlorine vapor at leak rates of 100 lbs/min or more, exceeding the requirements of the Uniform Fire Code. The EVS-2000 system is designed to maintain negative pressure in the chlorination and chlorine storage rooms, while limiting the atmospheric release of chlorine to less than 1 ppm. The factory-assembled EVS-2000 system is very compact, with low profile suitable for either indoor or outdoor installation.
EVS-2000C
The EVS-2000C emergency chlorine scrubber is a multi-stage wet scrubber system designed to treat up to one ton of chlorine vapor, at leak rates of 100 lbs/min or more, exceeding the requirements of the Uniform Fire Code. The EVS-2000C system is designed to maintain negative pressure in the chlorination and chlorine storage rooms, while limiting the atmospheric release of chlorine to less than 1 ppm. The factory-assembled EVS-2000C system is very compact, with low profile suitable for either indoor or outdoor installation.
Bulk Chemical Storage and Feed Systems (Storage Silos)
Integrity Municipal Systems LLC (IMS) Bulk Chemical Storage and Feed Systems are used to store and feed dry Hydrated Lime, Quicklime, Powdered Activated Carbon (PAC), or Soda Ash in a silo, dissolve it in a tank, and pump the chemical solution to the point of application. Each system’s design is tailored to the project’s needs. Systems typically include a storage silo with accessories and an integral chemical feed equipment room with instrumentation and controls to make a complete and functional system.
Benefits
• Pre-Assembled, Piped, Wired and Factory Tested
• Fully Engineered and Integrated Systems
• Single-Piece Welded Silo Construction (up to 14’-0” in diameter)
• Skirted Interior with Insulation, Lighting, Fans, Dampers, Louvers, and Heaters
• Completely Automatic Control System with PLC
• Flexible Configurations and Options for Differing Installation Requirements
Lime Paste-Type Slaker Systems (A-758™ & A-758 Plus™)
The IMS Lime Slaker Systems provide continuous high volume lime slurries (up to 8,000 lbs/hour) for industrial and municipal process pH adjustment, flocculation, and chemical reaction. The superior paste-type slaking technology consistently produces a higher strength and more reactive lime slurry resulting in more efficient and more economical use of the quicklime.
Lime Slaker System: Grit Removers
• Conveyor Type Grit Remover
• Screw Type Grit Remover
• Screen Type Grit Remover
Lime Slaker System: Feeders
• Series 31-165 Gravimetric Feeder
• Series 32-215 Volumetric Feeder
• Series 32-300 Volumetric Feeder
SGC-2000™ and SGC-2000 PLUS™ Gravimetric Feed Controllers
• Accurate and reliable gravimetric feeder control
• Allen-Bradley based industrial control hardware and software
• Limited number of interconnecting wires for easy installation and generation, and maintenance
• Simple and intuitive touchscreen interface
• Ethernet communications
• Optional Feeder AC motor use for reduced transformer size, heat
• Optional VFD ODVA communication eliminates analog signal inaccuracies
Odor Control Systems
IMS has developed a line of standardized, pre-engineered, factory assembled odor control systems for treating odors at sewage pump stations and wastewater treatment plants. Pre-engineered systems are simple to install, reducing the overall installed cost and delivery time.
Biological Odor Control Systems
The I-BOx® Biological Odor Control System (patent pending) uses a two-stage process with a biological stage to remove 99% of the hydrogen
sulfide (H2S), followed by an activated carbon polishing stage to remove residual H2S and organic odors. Standard models are available to treat up to 5,000 cfm (8500 m3/h) of odorous air.
I-BOx® Biological Odor Control System Models:
• I-BOx® 75 - 250 cfm BIOLOGICAL ODOR CONTROL SYSTEM
• I-BOx® 350 - 5,000 cfm BIOLOGICAL ODOR CONTROL SYSTEM
Carbon Adsorber Odor Control Systems
The IMS carbon adsorber odor control systems are designed to work with a wide selection of media: virgin activated carbon media for low odor level, and high capacity carbon for higher H2S concentrations.
• Modular Carbon Systems (MCS) Activated Carbon Odor Control Systems:
The MCS carbon adsorber odor control systems are single bed, skid-mounted, dry media systems, designed for relatively lower odor levels. The media may be virgin activated carbon or any of a number of specialty catalytic carbon media. Standard models are available to treat up to 1,250 cfm (2,120 (m3/h)) of odorous air.
• Bulk Carbon Systems (BCS) Activated Carbon Odor Control Systems:
The BCS activated carbon odor control systems are larger bulk media systems, designed for higher air flow rates. The media may be virgin activated carbon or any of a number of specialty catalytic carbon media. Standard models are available to treat up to 6,800 cfm (11600 m3/h) in a single carbon bed system and up to 20,000 cfm (34000 m3/h) in a dual bed system.
Chemical Scrubber Odor Control Systems
IMS’ Packaged Chemical Scrubber is a multi-stage high efficiency scrubber capable of promoting different chemical reactions in each stage and targeting a range of different compounds found in municipal Wastewater Treatment Plants and Pump Stations. The system is designed tobe compact and low profile, enabling indoor or outdoor installation. IMS’ chemical scrubber system is completely factory assembled for ease of installation treating airflow capacities up to 40,000 m3/h in a single system.
• Reliable in the long term with robust design
• Minimized footprint and height required for the scrubber system and associated pumps and piping ductwork.
• Provides flexibility to customize the chemistry of each stage, to optimize the operating chemistry for actual plant odors, and to respond to process variations.
• Will make optimum use of chemical and minimize chemical costs.
• Will be delivered and installed quickly and smoothly, with minimum construction and installation cost and time.
• Will not require downtime for routine calibration and maintenance.
• Provides maximum value measured by effective odor control with minimum problems, maintenance and operating cost.
Packaged Chemical Feed Systems
IMS chemical feed systems are pre-assembled, fully-functional chemical delivery systems for water treatment applications. These compact, user-friendly chemical skids include local storage tanks, full secondary containment, dosing pumps, instrumentation and controls. Systems are piped and wired at the factory for easy and quick hook-up.
Aqueous Ammonia Feed System
IMS packaged Aqueous Ammonia feed systems are used in the formation of chloramines for disinfection within the treated water pipelines and distribution system. They include a heavy duty pressure rated aqueous ammonia storage tank, integral ammonia fume scrubber, peristaltic dosing pump, instrumentation and controls in a fully contained, pre-assembled skid.
Fluoride Saturator and Feed System
IMS packaged Fluoride Feed Systems are used for community water fluoridation. They are designed with separate saturator and solution tanks to assure complete saturation, high reliability, low maintenance, and ease of use. Systems are sized to meet customer requirements.
Hydrofluosilicic Acid Feed System
IMS packaged Hydrofluosilicic Acid Feed Systems are used for community water fluoridation. They provide safe storage and accurate dosing of Hydrofluosilicic Acid, in a fully contained, pre-assembled skid. Packaged systems are pre-wired and piped with local instrumentation and controls.
Liquid Ammonium Sulfate (LAS) Saturator and Feed System
IMS packaged liquid ammonium sulfate (LAS) feed systems are used in the formation of chloramines for disinfection within the treated water pipelines and distribution system. IMS LAS Saturator and Feed System technology can reliably produce liquid ammonium sulfate solution from solid ammonium sulfate, decreasing chloramination chemical costs. The system is fully contained in a pre-assembled skid.
Sodium Hypochlorite Feed System
IMS packaged Sodium Hypochlorite Feed Systems are used as an alternative to gaseous chlorine to provide disinfection of the water at the water treatment plant and distribution system. They provide safe storage and controlled, accurate delivery of sodium hypochlorite solution, in a fully contained, pre-assembled skid. Systems may be customized to meet user needs.
Emergency Chlorine Scrubbers
IMS wet emergency chlorine scrubber systems are designed to contain and treat accidental releases of chlorine gas. The scrubber systems are factory pre-assembled, piped, wired and tested.
EVS-150
The EVS-150 emergency chlorine scrubber is a multi-stage wet scrubber system designed to treat chlorine vapors from a bank of 150lb (70kg) chlorine cylinders, at leak rates of 28 lbs/min or more, exceeding the requirement of the Uniform Fire Code. The EVS-150 system is designed to maintain negative pressure in the chlorination and chlorine storage rooms, while limiting the atmospheric release of chlorine to less than 1 ppm. The factory-assembled EVS-150 system is very compact, with low profile suitable for either indoor or outdoor installation.
EVS-2000
The EVS-2000 emergency chlorine scrubber is a multistage wet scrubber system designed to treat up to three tons of chlorine vapor at leak rates of 100 lbs/min or more, exceeding the requirements of the Uniform Fire Code. The EVS-2000 system is designed to maintain negative pressure in the chlorination and chlorine storage rooms, while limiting the atmospheric release of chlorine to less than 1 ppm. The factory-assembled EVS-2000 system is very compact, with low profile suitable for either indoor or outdoor installation.
EVS-2000C
The EVS-2000C emergency chlorine scrubber is a multi-stage wet scrubber system designed to treat up to one ton of chlorine vapor, at leak rates of 100 lbs/min or more, exceeding the requirements of the Uniform Fire Code. The EVS-2000C system is designed to maintain negative pressure in the chlorination and chlorine storage rooms, while limiting the atmospheric release of chlorine to less than 1 ppm. The factory-assembled EVS-2000C system is very compact, with low profile suitable for either indoor or outdoor installation.
A-758™ and A-758 Plus™ Paste-Type Lime Slaker Refurbishment Service
IMS provides A-758™ and A-758 Plus™ Paste-Type Lime Slaker refurbishment services to restore the slaker to its original condition. The refurbishment consists of reassembling and replacing components to restore the slaker to its originally manufactured state. Refurbishment of an old slaker provides significant cost savings compared to the purchase of a new slaker system. IMS can review a particular application to determine whether the slaker is a
good candidate for refurbishment. Please visit our website for project case studies.
Scrubber Acid Wash and Refurbishment Service
With over 30 years of experience in the design, operation, servicing, commissioning, operational testing, performance testing, parts supply and refurbishing of emergency chlorine scrubbers and chemical odor control scrubbers, the IMS field service team has the knowledge and dedication to tackle any issues that arise with your emergency chlorine scrubber and odor control systems. From routine maintenance to full system rebuilds, we get it done. Please visit our website for project case studies.
Please contact us here for more information on our systems, product specifications, or a customized project quote or chat with us now by clicking on the chat icon in the bottom right.
IMS provides A-758™ and A-758 Plus™ Paste-Type Lime Slaker refurbishment services to restore the slaker to its original condition. The refurbishment consists of reassembling and replacing components to restore the slaker to its originally manufactured state. Refurbishment of an old slaker provides significant cost savings compared to the purchase of a new slaker system. IMS can review a particular application to determine whether the slaker is a
good candidate for refurbishment. Please visit our website for project case studies.
Scrubber Acid Wash and Refurbishment Service
With over 30 years of experience in the design, operation, servicing, commissioning, operational testing, performance testing, parts supply and refurbishing of emergency chlorine scrubbers and chemical odor control scrubbers, the IMS field service team has the knowledge and dedication to tackle any issues that arise with your emergency chlorine scrubber and odor control systems. From routine maintenance to full system rebuilds, we get it done. Please visit our website for project case studies.
Please contact us here for more information on our systems, product specifications, or a customized project quote or chat with us now by clicking on the chat icon in the bottom right.
Your browser does not support viewing this document. Click here to download the document.
