Lime Feed Systems
Series 32-215 Volumetric Belt Feeder
The Series 32-215 is a simple, high-capacity volumetric belt feeder. It gives reliable long term feeding and requires little maintenance. It easily handles lime from fine powder to pebbles. Its design and operation is simple and uncomplicated and provides reliable feeding at minimum cost. This volumetric feeder is ideal for industrial and municipal water and wastewater treatment systems or for systems treating industrial-process water.
KEY BENEFITS
• Manual or automatic control
• Simple and straightforward volumetric feeding to 133 cu ft/hr
• Easy to install and maintain
• Self-adjusting belt tracking
FEATURES
Manual or Automatic Control
Feed rate is controlled by varying the height of a manually positioned vertical gate at the feeder inlet and by varying belt speed. The variable speed belt provides a 20:1 standard operating range. Belt speed can be controlled manually or automatically from a remote 4-20 mA control signal.
Simple and Straightforward Volumetric Feeding Up to 133 ft3/hr
With gate adjustment and different gearboxes and driven sprockets, the feeder will provide a wide range of capacity selection and flexibility. Maximum
rates cover virtually all water and wastewater lime feed requirements.
Simple, Automatic Belt Tension and Tracking
Constant and uniform tensioning of the feed belt is achieved by the use of counterweights acting on the moveable front (discharge) roll. An adjustable
manual tensioning roller includes a belt tracking guide which, in conjunction with the movable front roller, directs the belt along a straight path. Both
of these mechanisms function together to provide accurate and reliable feeder operation.
Easy to Install and Maintain
All feeders are factory calibrated and tested prior to shipment. The feeder housing is dust-tight. Side and top covers are gasketed and easily removed. The product zone is easily accessible and can be air cleaned. Sealed bearings are used throughout. Six scrapers, spaced on both sides of the belt and on the rollers, keep the belt transport free of product build up. The belt transport system is cantilevered for easy belt removal without tools.
OPERATION
Lime is supplied to the belt feeder by gravity from an overhead storage bin or hopper. The lime is introduced to the belt through the inlet chute. As the belt moves, the lime is sheared by a manually adjusted vertical gate which sets the lime bed depth. Gate position is adjustable over a 10 to 1 range. Belt speed is adjusted over a 20 to 1 range by a manual potentiometer or automatic milliamp control signal sent to the VFD.
Please contact us here for more information on our Lime Slaker Systems, product specifications, or a customized project quote or chat with us now by clicking on the chat icon in the bottom right.
KEY BENEFITS
• Manual or automatic control
• Simple and straightforward volumetric feeding to 133 cu ft/hr
• Easy to install and maintain
• Self-adjusting belt tracking
FEATURES
Manual or Automatic Control
Feed rate is controlled by varying the height of a manually positioned vertical gate at the feeder inlet and by varying belt speed. The variable speed belt provides a 20:1 standard operating range. Belt speed can be controlled manually or automatically from a remote 4-20 mA control signal.
Simple and Straightforward Volumetric Feeding Up to 133 ft3/hr
With gate adjustment and different gearboxes and driven sprockets, the feeder will provide a wide range of capacity selection and flexibility. Maximum
rates cover virtually all water and wastewater lime feed requirements.
Simple, Automatic Belt Tension and Tracking
Constant and uniform tensioning of the feed belt is achieved by the use of counterweights acting on the moveable front (discharge) roll. An adjustable
manual tensioning roller includes a belt tracking guide which, in conjunction with the movable front roller, directs the belt along a straight path. Both
of these mechanisms function together to provide accurate and reliable feeder operation.
Easy to Install and Maintain
All feeders are factory calibrated and tested prior to shipment. The feeder housing is dust-tight. Side and top covers are gasketed and easily removed. The product zone is easily accessible and can be air cleaned. Sealed bearings are used throughout. Six scrapers, spaced on both sides of the belt and on the rollers, keep the belt transport free of product build up. The belt transport system is cantilevered for easy belt removal without tools.
OPERATION
Lime is supplied to the belt feeder by gravity from an overhead storage bin or hopper. The lime is introduced to the belt through the inlet chute. As the belt moves, the lime is sheared by a manually adjusted vertical gate which sets the lime bed depth. Gate position is adjustable over a 10 to 1 range. Belt speed is adjusted over a 20 to 1 range by a manual potentiometer or automatic milliamp control signal sent to the VFD.
Please contact us here for more information on our Lime Slaker Systems, product specifications, or a customized project quote or chat with us now by clicking on the chat icon in the bottom right.
Your browser does not support viewing this document. Click here to download the document.
